Video Library of RM Elite Projects

See the precise architectural film application process for interior surfaces. Learn the technique for a smooth finish.

Randy like to make a thickness testing from the Di-noc material. He layers 4 Di-noc strips together the make 32 mils thick. This makes sure the the door close ok without rubbing, The film will last a lot longer on the subjects too.

This demonstration focuses on applying 8-mil thick Di-noc material to intricate, curved geometry. For professionals working in high-end environments like yachts or private jets, managing material tension in tight spaces is essential for a clean, durable result.

We show the manual techniques required for a smooth curved surface wrap, ensuring the film conforms perfectly without lifting. This method emphasizes patience and layered precision, which are standard requirements for quality interior finishing. Mastering these steps helps avoid common vinyl installation failures on high-value assets.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn the professional technique for wood grain matching to ensure your component assembly results in a seamless wood finish.

Achieving a high-quality look requires precision when aligning materials. This guide walks through the specific steps for preparing trays and positioning pieces so the patterns align perfectly across the entire surface.

Applying these woodworking techniques helps you maintain a cohesive aesthetic, especially when working with patterned materials. By focusing on the orientation of each piece before final installation, you can avoid common errors that disrupt the visual flow of the final product. Wood grain matching is the preferred way to achieve a professional result.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

See how to apply 3M Di-Noc to a private jet door for a durable, clean interior finish. This technique ensures a smooth, factory-grade result on aviation hardware.

Working with architectural film in an aviation environment requires consistent heat control and steady hands. We demonstrate the full workflow for measuring and trimming material to fit complex door geometries, ensuring the adhesive bonds perfectly without air pockets. This process is essential for maintaining the integrity of the cabin interior.

Proper surface preparation is the foundation of any high-quality aviation wrap. By following these methodical steps, you can achieve a result that stands up to the wear of frequent cabin travel. We break down the specific tools and techniques needed to handle high-grade vinyl application for professional results

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Watch the precise application of an aircraft interior wrap on a private jet entryway. See how we handle complex paneling.

This project focuses on the right side of the entryway, where exact alignment of material is critical. Working on private jet maintenance requires a steady hand and knowledge of how to handle delicate hardware, specifically around door mechanisms and interior panels.

We demonstrate the workflow for applying architectural film to ensure a smooth, durable finish that stands up to cabin wear. By following these methodical steps, you can achieve a factory-grade result that maintains the high standards required for aviation interior work.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn how to apply a door wrap using architectural film to refresh your interior trim and frame without painting.

This guide demonstrates the step-by-step process of applying durable material to both your door and surrounding trim molding. We cover the essential techniques for measuring the film, smoothing corners, and applying heat to ensure a professional, long-lasting finish.

Whether you are updating a single room or renovating an entire home, mastering vinyl installation is a practical way to achieve a high-end look. We focus on the precise cutting and squeegee methods required to work with architectural film, helping you avoid common mistakes like bubbles or lifted edges on complex surfaces.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn the correct method for applying architectural film to van interior walls. This guide covers the step-by-step process.

Renovating a van interior requires specific techniques to ensure the material adheres properly to the surfaces. We demonstrate how to work methodically from top to bottom, using your hands to secure the film without creating bubbles or creases. This approach is essential for anyone looking to achieve a professional-grade look inside a cramped workspace.

Proper vinyl installation relies on patience and consistent pressure. By watching this method, you can see how to handle the material effectively to ensure it stays in place on vertical surfaces. This walkthrough provides the necessary details to manage the application process confidently, whether you are working on a vehicle conversion or other renovation projects using peel and stick materials.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn how to apply a professional door wrap to your home using architectural film for a durable, clean finish.

This guide covers the step-by-step process of updating doors and trim using high-quality vinyl. We demonstrate the proper way to use a squeegee and heat gun to activate the adhesive, ensuring the material bonds securely to the surface. This technique is ideal for those looking to refresh their space with a professional-grade look without the cost of a full replacement.

Proper surface preparation is the foundation of a successful vinyl installation. We use ZINSSER Gardz to seal the surface before applying the film, which prevents peeling and ensures longevity. By mastering the heat control and tension required for trim wrapping, you can achieve a seamless result that stands up to daily wear and tear.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

See the step-by-step process for a boat table wrap, combining dark architectural film with a smooth epoxy resin finish.

This project demonstrates the removal of old material from a boat table and the application of a durable dark vinyl wrap. Achieving a professional look requires attention to detail, specifically when ensuring the surface is clean and the material is laid down without air pockets.

Once the film is secure, the final step involves applying a clear epoxy resin coat for added protection and a glossy appearance. This technique provides a resilient surface suitable for marine environments, ensuring your furniture stands up to daily wear while maintaining a clean aesthetic. Using the right vinyl wrap installation tools is essential for managing edges and corners effectively.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

See how to update your home with a professional kitchen cabinet wrap. This process demonstrates how to modernize existing fixtures.

Renovation projects often require finding efficient ways to update outdated surfaces. This demonstration focuses on the practical application of architectural film to cabinetry, countertops, and wall surfaces. Whether you are a DIY enthusiast or a professional installer, seeing the specific techniques used for material alignment and edge finishing provides a clear roadmap for achieving a factory-grade result.

The installation relies on using high-quality 3M Di-Noc materials, which offer durability and a wide range of aesthetic options for any kitchen renovation. By watching the methodical approach to material application, you can learn how to avoid common pitfalls like trapped air or improper adhesion. This guide highlights the precision required to make older fixtures look entirely new without the cost of a full demolition.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn how to stay organized during vinyl cutting and architectural film application projects with these practical tips! In this video, we explore the importance of keeping your workspace tidy and efficient, just like Randy does. By designating a specific area for stacking backing paper and maintaining order throughout the process, you'll streamline your workflow and ensure a clean job site.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

In this video, Randy Miller from RM Elite showcases a stunning boat interior transformation using vinyl wraps. Over a 10-day process, he meticulously applies high-quality vinyl to walls, cabinetry, doors, and even curved surfaces, giving the boat a fresh, modern look without the need for costly renovations.

Randy explains the techniques he used, such as ensuring uniform wood grain patterns, utilizing butt joints and double cuts, and applying polyurethane for durability. He also highlights the benefits of wrapping over traditional remodeling, including affordability, customization, and ease of repair.

The video includes a full walkthrough of the finished boat, revealing the dramatic before-and-after results. If you're interested in boat or yacht wraps, Randy shares information on materials, samples, and how to get in touch for consultations.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Join Randy Miller as he showcases the stunning transformation of a yacht's interior using architectural vinyl wraps. Filmed in Gulf Shores, Alabama, this project took 108 hours over 11 days, using high-quality vinyl films to wrap walls, cabinets, doors, and furniture for a sleek, modern look.

🔹 What You'll See in This Video:

✅ Full yacht interior walkthrough

✅ Step-by-step explanation of the wrapping process

✅ Challenges faced and expert wrapping techniques

✅ Benefits of vinyl wrapping vs. painting

✅ Before & after views of the yacht transformation

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

This video is about the Architectural films. How Randy wraps a vent. Randy talks about some of the subjects you can wrap on the vinyl material and the Architectural Film Squeegees. All the Architectural Films comes 4 feet wide. You should insist on Architectural Finishes because it is lightweight and self-adhering, and can be applied on site to the existing substrate, reducing labor and material cost compared to natural materials. With  Architectural film products, you create a whole new look, quickly and inexpensively, but not at the expense of aesthetics, thanks to its uncanny resemblance to natural materials. Use this product for both renovations or new construction.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Proper jet interior preparation is the foundation for any high-quality finish. See how we clean and sand surfaces before work.

Refurbishing an aircraft requires a rigorous approach to ensure every panel is ready for material application. This footage details the essential steps of surface preparation, from using glass cleaner on delicate components to sanding down specific areas to ensure a perfectly smooth base. We showcase the tools and cleaning materials necessary to maintain the strict standards required in aviation environments.

Whether you are involved in professional aircraft refurbishment or looking to understand the labor behind luxury aviation cleaning, this process highlights the patience needed for a flawless result. We focus on the meticulous removal of debris and the careful inspection of every corner to guarantee that no spots are missed during the cleaning phase.

RM Elite Aero Yachts

Randy Miller

Randy@rmwraps.com - 208-696-1180.

See the precision required for sanding a Jet G5 interior. We focus on surface preparation for a flawless finish.

Day two of our Jet G5 project centers on consistent surface preparation. We are using 220-grit sandpaper across the galley and bathroom areas to ensure every section is smooth and ready for the next stage of the interior restoration.

Achieving a professional finish on aviation interior components requires patience, especially when working on small, detailed sections. This footage demonstrates the methodical sanding techniques we use to maintain uniform results across complex geometries, helping you understand the manual labor involved in these high-end upgrades.

RM Elite Aero Yachts

Randy Miller

Randy@rmwraps.com - 208-696-1180.

See the precise architectural film application process for interior surfaces. Learn the technique for a smooth finish.

Randy like to make a thickness testing from the Di-noc material. He layers 4 Di-noc strips together the make 32 mils thick. This makes sure the the door close ok without rubbing, The film will last a lot longer on the subjects too.

This demonstration focuses on applying 8-mil thick Di-noc material to intricate, curved geometry. For professionals working in high-end environments like yachts or private jets, managing material tension in tight spaces is essential for a clean, durable result.

We show the manual techniques required for a smooth curved surface wrap, ensuring the film conforms perfectly without lifting. This method emphasizes patience and layered precision, which are standard requirements for quality interior finishing. Mastering these steps helps avoid common vinyl installation failures on high-value assets.

RM Elite Aero Yachts 

Randy Miller Randy@rmwraps.com - 208-696-1180.

Maintaining a clean job site is the first step toward a successful aircraft cabin remodel.

Before any major renovation begins, the interior must be stripped down to a blank canvas. This process involves clearing out debris and strategically placing materials so that every technician has the space they need to work efficiently. By focusing on site preparation early, we eliminate potential hazards and ensure that expensive aviation components remain protected throughout the duration of the project.

An organized workspace allows for a faster cabin refurbishment by keeping tools accessible and surfaces ready for immediate treatment. We prioritize this methodical approach to prevent delays caused by clutter or misplaced equipment. Seeing the cabin in this state helps you understand the logistics required to manage a high-end aviation interior project from start to finish.

RM Elite Aero Yachts

Randy Miller

Randy@rmwraps.com - 208-696-1180.

Restoring a Private Jet for wrapping Day 1.

Watch the critical surface preparation steps required before starting a jet interior refurbishment on a G5 aircraft.

Successfully applying high-end films starts long before the material touches the wall. This video documents the first day of work, focusing on sanding and cleaning walls to ensure a smooth, durable finish for the upcoming Di-noc installation. Taking the time to properly prep the substrate is the most important factor in achieving a long-lasting, professional result inside an aircraft cabin.

We break down the specific techniques used to ready the interior surfaces for vinyl installation. By focusing on these foundational steps, you can avoid common adhesion issues and ensure the final aesthetic meets the high standards required for aviation environments. Whether you are a professional installer or interested in the process of luxury aircraft upgrades, this footage highlights the patience and precision necessary for a successful project.

RM Elite Aero Yachts

Randy Miller

Randy@rmwraps.com - 208-696-1180.

Learn how to wrap drawer fronts without removing the entire unit. This simple method keeps your furniture intact while updating it.

Updating your home decor does not require taking everything apart. This guide shows you the exact steps for applying vinyl wrap directly to your existing cabinets. By leaving the drawer box inside the frame, you save significant time and effort during the renovation process. Whether you are a beginner or experienced with DIY projects, this technique ensures a clean, professional finish on every surface.

To achieve the best results, focus on precision when you measure and cut the wrapping material. Removing the drawer handles first is essential for a smooth application. Use your thumb to firmly press the material around the edges, as this tactile feedback helps you avoid air bubbles and ensure the adhesive bonds correctly. Following these steps allows you to refresh your furniture with minimal tools and stress.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Follow our progress on this boat interior vinyl wrap project. See how we handle doors, frames, and refrigerator installations in two days.

This video provides a walkthrough of the work completed during the second day of a major interior renovation on a work boat. We focus on the installation of architectural films to refresh various spaces, including hallways, stairwells, and the kitchen area. By watching the application process, you can see how we manage seven different doors, utilizing both full and front-facing wraps to achieve a clean, professional finish.

We also touch on the durability of these materials, referencing past projects that have remained in excellent condition for over three years. Whether you are considering a boat interior vinyl wrap for your own vessel or looking for tips on custom door wraps, this progress log highlights the precision required for a successful upgrade. Seeing the completed work on the fridge and door frames demonstrates the potential for restoring high-traffic areas with the right technique.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Randy is passionate about 3M Di-Noc, a high-quality film for interior and architectural surfaces. He knows his stuff; from where it's made to reliable warehouse storage in the USA and beyond. Randy values how durable this product can be when installed correctly, plus he loves seeing all its beautiful patterned woodgrain textures come alive with any surface they grace. Plus, did we mention that it has excellent stain-resistance capabilities? Who wouldn't want something like that too? It looks good now but Randy promises us won’t wear out anytime soon either thanks to its extended shelf life!

Randy is talking about where it’s manufactured, warehouses in the USA, ordering the film, film backing or glue side, Stain Resistance, Cleaning, what surfaces to install the 3M DI-Noc, patterns on the wood grains, Shelf life, and storage, why Randy like using the 3M Di-Noc.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Applying Di-noc is the fastest way to get a clean, white finish on your outdated kitchen cabinets today.

Updating your kitchen doesn't require a full renovation or expensive new hardware. This demonstration focuses on the technical side of cabinet refinishing, showing exactly how to size your adhesive material and apply it without trapping air bubbles. If you have been struggling to get a crisp edge on your furniture, this method offers a reliable way to achieve a professional-looking result using only basic tools.

Watch how to trim the film for a perfect fit and use consistent pressure to smooth out the surface for a durable bond. By focusing on steady application techniques, you can ensure your Di-noc stays flat and secure over time. This approach works for anyone looking to refresh their space with a clean, modern aesthetic without the mess or cost of painting.

Subscribe for weekly home improvement breakdowns, and comment below if you want to see more DIY furniture projects.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

In this video, the presenter demonstrates a step-by-step guide on how to wrap a door with vinyl for a professional and clean finish. The tutorial covers preparation, measuring, cutting, applying primer, wrapping techniques, and finishing touches to ensure a flawless result.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

In this video, Randy Miller from RM Elite demonstrates the process of wrapping the inside of a lift-top desk using architectural vinyl film. He shares expert tips and techniques, including surface preparation, precise cutting, and application tricks to achieve a seamless and professional finish.

Learn the precise steps for a lift-top desk wrap. See how to measure, clean, and trim vinyl film for a professional finish.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Wrapping the interior of furniture requires specific preparation to ensure the material adheres correctly. This tutorial breaks down the cleaning process for the desk surface and explains how to take accurate measurements. You will learn the importance of leaving an inch bleed on all sides to account for overlapping and adjustments during the application.

Randy Miller from RM Wraps demonstrates the correct knife blade technique for cutting film with light pressure. This method prevents damage to the underlying furniture while ensuring clean, sharp edges. By following these desk wrapping tips, you can update your workspace furniture with confidence and precision.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

See how 3M Di-Noc ME-1685 Metallic film upgrades cabinets and panels with a durable, high-end finish.

Applying architectural film is a practical way to refresh interior surfaces without replacing them entirely. This demonstration shows the precise process of installing 3M Di-Noc ME-1685 Metallic film onto various substrates, including flat panels and complex pieces with screen cutouts. Whether you are a professional installer or a DIY enthusiast looking for a clean aesthetic, this video provides a clear look at managing edges, corners, and adhesion for a professional result.

By watching the application of this specific metallic film, you will learn how to handle the material to avoid bubbles and ensure a smooth, lasting bond. We focus on the practical techniques required to achieve a seamless look on cabinets and custom furniture. Seeing the before and after comparison helps clarify how this vinyl wrap material interacts with different textures and shapes.

Subscribe for weekly interior finishing tutorials, and comment below if you want to see a specific surface material covered next.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Discover how RM Wraps, led by Randy Miller, transformed the interior of a Falcon 900B jet using cutting-edge 3M Di-Noc ME Series metallic architectural films. In this video, you’ll see the precision, care, and expertise that go into wrapping aviation interiors—an innovative alternative to traditional painting.

Learn about the advantages of vinyl wrapping, including faster turnaround times, endless design options, and meticulous craftsmanship. Watch as intricate details like cabinet doors, shelves, and corners come to life through professional wrapping techniques

Introduction to the Aviation Wrap Project

• Presenter: Randy Miller, RM Elite.

• Project Overview: Wrapping a Falcon 900B jet using 3M Di-Noc ME Series metallic architectural films.

• Advantages of Wrapping:

• Faster than traditional painting. Offers a wide variety of design patterns.

• Transforms the jet’s interior aesthetics efficiently.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Watch how a professional door wrap restores a luxury aviation interior using advanced 3M Di-Noc architectural film.

Applying high-end vinyl to aviation hardware requires extreme precision, as the curved geometries of a private jet door demand perfect tension and heat control. This process highlights the exacting standards necessary to ensure that every edge and corner maintains a seamless, factory-grade aesthetic. Rather than just surface coverage, the focus here is on the specialized trimming techniques that prevent lifting or peeling under the unique stresses found in aircraft environments.

This project was executed by the team at RM Wraps LLC, demonstrating the meticulous preparation required for such high-value assets. By examining this specific private jet interior component, you can see how proper material selection impacts the final durability and visual finish of the upgrade. Achieving a flawless result on these surfaces is not just about the vinyl itself, but the deliberate, calculated application method that prevents common installation failures.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

See how to set up a foldable black table for your home or workspace. This guide demonstrates the assembly process from start to finish.

Whether you are setting up a small office area or need extra surface space for projects, this foldable black table offers a practical solution. The assembly process is straightforward, requiring you to connect the legs and secure the hinges properly. By following these steps, you will quickly have a sturdy surface ready for daily use.

This video details every component, including the surface panel and support frame, ensuring you understand how each part fits together. Proper installation of the hinges is critical for stability, so pay close attention to the alignment instructions. Once the legs are locked in place, the table is fully functional and ready for your equipment or tasks.

By organizing your furniture assembly with clear steps, you save time and frustration. If you need portable furniture solutions, consider how this compact design fits your specific room layout.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Get a closer look at this black electronic device and its unique organizational layout. See how the hardware functions.

This demonstration focuses on the practical design of this portable unit, specifically highlighting the interaction between the silver handle and the primary lid mechanism. We examine the internal storage capacity by opening the compartments, ensuring you understand exactly how the space is configured for your items. Whether you are curious about the port placement or the overall build quality, this walkthrough offers a clear view of the device from every angle.

Beyond the physical structure, we verify the specific contact information located on the internal label. This includes direct details for the flight deck and VIP line, providing essential context for operators. Understanding these logistics is crucial for anyone using this hardware in a professional capacity, so we make sure the text is legible and easy to reference throughout the clip.

Subscribe for weekly hardware breakdowns, and comment below with your thoughts on this specific organizational design.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Install the a vinyl wrap on one side of a door and wrapped the frame only took 1 hour. Used 14 feet long roll of the Architectural film.

Applying a door wrap to your home entrance can update the look of any room. Watch the step-by-step process of covering a textured door.

This demonstration tracks the application of a vinyl door wrap on both the slab and the frame. The project focuses on a textured surface, showing how the material adheres to non-smooth finishes. It is a helpful resource for anyone considering a diy home improvement project who wants to see the reality of the installation time required.

Completing one side of this door took approximately one hour of work. By observing this door covering application, you can better estimate how long your own renovation might take. The textured finish adds a unique character to the final result that standard paint often misses.

Subscribe for weekly home renovation tips and comment below if you prefer textured or smooth finishes on your furniture projects.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn how to perform architectural vinyl repair on cuts and nicks using simple, professional-grade techniques.

Damaged vinyl surfaces do not require a full replacement. Instead, you can save time and money by applying wood putty directly to the affected areas. This method is effective for fixing small imperfections, allowing you to blend the repair seamlessly into the existing finish. Whether you are working on cabinetry or other architectural films, this approach ensures a clean result without the hassle of stripping or re-applying material.

I demonstrate the use of a Minwax blend filler pen, which is my preferred tool for this process while traveling. By selecting the correct color match—ranging from light to dark shades—you can fill nicks just as you would with real wood. This straightforward technique is ideal for anyone looking to maintain their installations quickly and efficiently.

Subscribe for weekly maintenance and repair breakdowns, and let me know in the comments if you have a specific surface repair challenge you want me to cover next.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Welcome back to the channel! It’s 8 of working on this exciting private jet interior project in Atlanta, Georgia. In this video, I’m sharing the progress we’ve made so far using 3M DI-NOC architectural film to transform the jet’s walls, cabinets, and doors into a sleek and modern space.

This video provides a detailed walkthrough of an 8-day vinyl wrap project on a private jet. The presenter from RM Wraps showcases the before and after results, explaining the materials used (Dino WG1 1364) and the meticulous process of wrapping various sections, including doors, shelving, walls, and hidden compartments. Challenges such as removable parts and maintenance access are discussed, ensuring a high-quality and functional finish.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn the professional techniques for a clean plane door wrap. See how to prep surfaces and cut vinyl for a smooth finish.

This guide demonstrates the full process of preparing aircraft interior components for a fresh look. Whether you are working on a restoration or routine maintenance, you will see how to handle minor surface imperfections properly. The video focuses on the essential steps for Bondo repair, ensuring the surface is level and ready for material application before the final finish is applied.

Mastering the right vinyl installation method is critical for achieving a seamless fit around complex openings and door handles. We walk through the scraping and sanding process, followed by the precise cutting techniques needed to secure the wrap without damaging the underlying structure. These methods are designed for anyone looking to improve the aesthetics of aircraft panels while maintaining durability.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Master the vinyl wrap process on complex shapes. Learn how to get a smooth, professional finish on any curved surface.

Applying this type of vinyl wrap to flat panels is straightforward, but tackling a curved surface requires a specific approach. This guide demonstrates the essential steps for managing corners and complex angles without creating wrinkles or bubbles. You will see exactly how to manipulate the material to maintain tension while ensuring it adheres perfectly to the substrate.

Success depends on your tool management. The video focuses on proper heat gun control to soften the material, allowing it to stretch and conform to difficult contours. You will also learn the correct squeegee technique to push out air pockets and set the edges for a lasting bond. By following these precise cutting and shaping methods, you can achieve a professional finish that looks clean and intentional.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn how to apply a brown furniture vinyl wrap for a clean, professional finish on your next project.

This video demonstrates the full process of giving an old piece of furniture a fresh look using adhesive vinyl. Whether you are a beginner or looking to refine your technique, you will see exactly how to measure, cut, and smooth the material to avoid air bubbles.

We focus on the practical steps of applying vinyl wrap to flat surfaces, ensuring the edges are sealed properly. By following this DIY furniture makeover approach, you can achieve a durable and aesthetically pleasing result with your furniture vinyl wrap without needing expensive equipment. Mastering this furniture wrapping tutorial takes patience, but the final result is worth the effort.

3M Di-Noc Cherry Wood WG-1364 Architectural Film https://www.rmwrapsstore.com/products/3m-di-noc-cherry-wg-1364-architectural-film?_pos=1&_sid=0e65e3e49&_ss=r

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn the professional method for airplane door repair using aviation Bondo. See how to prep and smooth surface damage.

This video demonstrates the step-by-step process of fixing minor damage on aircraft components. Aviation technicians and DIY enthusiasts will see how to properly prepare a surface before applying filler. Using a 5-in-1 scraper, I clear away debris and create a clean area for the repair compound to adhere correctly.

After applying the aviation Bondo, the focus shifts to achieving a seamless finish. I explain the sanding techniques required to level the compound, ensuring the door surface is smooth and ready for the next stage of maintenance. Mastering these repair techniques helps maintain the structural integrity and appearance of the equipment.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Dealing with milky lacquer furniture is often a tedious, time-consuming process involving endless sanding and clear coating. Instead of stripping the piece down to the base, applying a vinyl wrap provides a durable, modern finish without the months of labor. This method is an effective way to update worn-out aesthetics on high-end pieces.

The video features the application of Di-Noc material, specifically the WG-7024 design, which offers realistic textures and various finishes. Whether you are looking to refinish furniture for a custom project or simply need a faster alternative to traditional methods, this material provides a clean, professional result.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Discover a quick, cost-effective solution to restore milky or deteriorating lacquer finishes on yachts, private jets, and other surfaces. In this video, we introduce the D-Noc wrapping material (WG 7024) as a modern alternative to traditional sanding and re-coating methods. Learn how wrapping saves time, reduces costs, and offers a wide range of textures and designs, including matte and satin finishes.

Introduction

• Topic: A quick and cost-effective solution for restoring milky or deteriorating lacquer finishes on surfaces such as yachts or private jets.

• Alternative Method: Instead of sanding and re-coating, the video presents wrapping as a simpler and faster option.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Explore the incredible possibilities of vinyl wrapping with RM Wraps! In this video, Randy Miller demonstrates the ease of applying vinyl wraps (Dino material or architectural films) on curved surfaces. Whether it’s a toilet, jet, yacht, or high-end home, vinyl wraps offer a quick, durable, and attractive way to update the look of any item.

Introduction to Vinyl Wrapping

• Overview: The video demonstrates the versatility of using vinyl wraps (Dino material or architectural films) on curved surfaces.

• Purpose: To showcase examples of wrapped items and the ease of application.

Key Highlights 1. Application on Curved Surfaces • Examples of curved items wrapped effectively.

• Emphasis on how straightforward it is to clean, apply, and remove wraps. 2. Versatility of Designs

• A demonstration of multiple wrap designs, including one for a toilet and others for jet and yacht parts.

• Wraps provide a quick and attractive way to update the look of items. 3. Durability and Quality

• Vinyl wraps are durable and retain their quality over time.

• Curves and edges are wrapped seamlessly, demonstrating professional results. 4. Wide Range of Applications

• Vinyl wraps can be used for high-end homes, kitchens, jets, yachts, and more.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

This video provides an in-depth look at 3M Di-Noc vinyl materials offered by RM Wraps. The presenter showcases a variety of wood-grain finishes, textures, and sheens, including the PW, DW, FW, and WG series. These vinyl wraps are ideal for high-end design projects such as cabinet doors, walls, and yacht interiors. The video also highlights the customization process for clients, pricing tiers, and product availability on the RM Wraps Store website.

1. Overview of Di-Noc Materials

Di-Noc materials are self-adhesive vinyl films used for interior design applications like furniture, doors, walls, and more.

2. Specific Material Series Demonstrated:

PW Series (matte sheen): Durable with minimal reflection - examples include PW-2319MT - DW Series (realistic look): Focuses on more realistic wood-grain textures ~ examples include DW-2229MT - FW Series (various sheens): Slight texture with moderate shine ~ examples include FW-1970 - WG Series (various sheens): lower-priced options ~ examples include WG-1050.

3. Features and Benefits

Different sheens (matte, satin, gloss) cater to diverse aesthetic and functional needs. Matte finishes help hide flaws like dents or scratches. Pricing ranges: Higher-price: PW Series. Mid-price: FW Series. Lower-price: WG Series.

4. Availability and Purchasing

Products can be purchased on our website rmwrapsstore.com. Active, available patterns and pricing are available and up-to-date on our website. Please contact us for current stock information prior to ordering.

00:00:01 - Introduction to Di-Noc Materials Overview of materials and their purpose for high-end applications.

00:00:26 - PW Series Overview Introduction to PW series with matte sheen and durability.

00:01:17 - DW Series Features Explanation of realistic wood-grain textures in the DW series.

00:01:55 - FW Series Satin Sheen Discussion of FW series and its satin-like finishes.

00:02:22 - WG Series Texture Highlighting the WG series with textured finishes and affordability.

00:03:09 - Pricing Breakdown Explanation of pricing tiers for different series.

00:03:48 - RM Elite Services Information on installation services and global availability.

00:04:18 - How to Purchase Details on purchasing through the RM Wraps store and blogs.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Vinyl wraps have become an essential tool for customization, protection, and aesthetic enhancement in various applications. In this video, Randy Miller from RM Elite conducted a thorough test on abrasion-resistant (AR) vinyl to compare it with regular vinyl in terms of durability, cleaning, and resistance to wear. The results? Quite surprising! Let’s dive into the details of this insightful experiment.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

in this video, the presenter demonstrates the process of wrapping an MDF board (Medium Density Overlay) with vinyl wrap. With nearly 10 years of experience, they explain the step-by-step method used to achieve a clean, professional finish.

Key Highlights:

✔️ Surface Preparation – Cleaning the board and applying Gardz clear coat for protection.

✔️ Primer Application – Using Primer 94 to enhance adhesion.

✔️ Vinyl Wrapping Process – Wrapping the back first, then the front to prevent curling.

✔️ Heat Gun Usage – Softening the vinyl for a seamless application.

✔️ Trimming & Post-Heating – Ensuring durability and a perfect edge finish.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

This video provides a step-by-step guide on surface preparation before applying a vinyl wrap. The host demonstrates the sanding process, cleaning techniques, and how to identify and fix surface imperfections using Bondo and Zinder Guards. A new PS 8370 MT vinyl is tested for adhesion and flexibility, showing how it curves around edges without the need for primer. The video emphasizes the importance of thorough prep work to ensure a flawless vinyl wrap installation. For more details on materials and techniques, visit rmwrapsstore.com.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

In this video, the RM Wraps team takes you through the inspection and preparation process for wrapping a jet's interior. The creator carefully examines the aircraft's surfaces, pointing out areas that need repairs, Bondo application, and sanding before applying the matte black vinyl wrap. He discusses removing handles, panels, and fixing warped areas to ensure a flawless finish.

Additionally, he shares insights into the tools and materials required, including Zinsser Guards, spot putty, and invisible glass cleaner, which he sources from Ace Hardware. The project is expected to take six days, with daily updates shared via blogs and videos.

If you’re interested in high-end vinyl wrapping, customization, or jet interior refurbishments, this video provides a behind-the-scenes look at the detailed craftsmanship involved.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

In this video, Randy Miller from RM Elite showcases a full interior wrap of a private jet using PS 3870 MT Di-noc material—a sleek, charcoal-toned wrap with a matte, stone-like finish. Over the course of 7 days, 82 feet of vinyl was meticulously applied to completely transform the look and feel of the jet's interior.

🛠️ What’s Covered: Full bathroom wrap (inside & out) Tray tables, doors (including both sides of select doors) Captain’s wall and galley area Sink, cabinetry, and detailed curved surfaces

🕒 Why It Took 7 Days: Every component was carefully removed and wrapped outside the jet for precision. Randy explains the time-consuming but worthwhile effort it takes to get professional-level detail on every surface.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Welcome to RM Wraps! Randy Miller here, showing you the process of applying the 3M Di-Noc on the interior of the jet, a growing trend we've been working on. Watch as a sleek private jet undergoes a stunning full interior wrap using 3M Di-Noc architectural finishes (DW-1883mt). This premium material is known for its realistic wood texture, high durability, and lightweight flexibility — making it ideal for aviation interiors where every detail matters.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

This video shows Randy working on a wooden interior cabinet wall, aircraft component, within a hangar. The process involves pre cleaning, using gardz on the surface and then wrapping the unit using the 3M Di-noc matte sheen wood grain pattern material.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Randy wants to show you how to prep out a surface before wrapping it with 3M Di-Noc material.

Here's the video on how Randy installs the video. Wood Grain Vinyl Wrap on Aircraft Interior | RM Wraps https://youtu.be/nJbzeiwGzO0

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Welcome to RM Wraps! Randy Miller here, demonstrating how to remove permanent marker from 3M Di-Noc film. This video shows effective permanent marker removal techniques on various film patterns, perfect for anyone looking to maintain their surfaces. Goof off was the best to clean off the marker. We tested on PW, DW, FW PS and CN patterns.

Chapters: 0:00

Welcome 1:53

Magic Eraser 4:54

Dawn dish soap 5:50

Glass Cleaner 7:01

Goof Off 11:09

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Welcome to RM Elite! Randy Miller here, showcasing the precise application of a wood grain vinyl wrap on aircraft interior components. This video highlights the meticulous process of using a faux finish to create a beautiful wood texture, demonstrating how to wrap complex surfaces with expert care. Our techniques ensure a seamless interior design transformation, perfect for any aviation project.

Order this Di-Noc Pattern here. 3M Di-Noc Walnut FW-1022 Architectural Film https://www.rmwrapsstore.com/products/3m-di-noc-walnut-fw-1022-architectural-film?_pos=1&_sid=2289caef4&_ss=r

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Welcome to RM Elite! Randy Miller here, showcasing the precise application of a wood-grain vinyl wrap on an aircraft's interior components. This video highlights the meticulous process of using a faux finish to create a beautiful wood texture, demonstrating how to install a 3M Di Noc product with expert care. Our techniques ensure a seamless interior wrap, perfect for any aviation project.

Order this pattern here. 3M Di-Noc Walnut FW-1022 Architectural Filmhttps://www.rmwrapsstore.com/products/3m-di-noc-walnut-fw-1022-architectural-film?_pos=1&_sid=2289caef4&_ss=r

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Welcome to RM Elite! Randy Miller here, detailing the initial stages of a jet vinyl wrap project in North Carolina. This video captures the meticulous preparation, including sanding down interior components and applying a surface sealer, highlighting the expert techniques involved in aircraft refurbishment. The process of wrapping intricate train coupler parts is particularly challenging, ensuring a flawless private jet interior and overall aircraft customization.

Order this pattern here. 3M Di-Noc Walnut FW-1022 Architectural Film https://www.rmwrapsstore.com/products/3m-di-noc-walnut-fw-1022-architectural-film?_pos=1&_sid=2289caef4&_ss=r

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Welcome to RM Elite! Randy Miller here, showcasing the meticulous process of applying a wood-grain vinyl wrap on an aircraft's interior components. This video highlights the precise use of a faux finish to create a beautiful wood texture, demonstrating how to install a vinyl film with expert care for a refined interior design. Our techniques ensure a seamless interior wrap, perfect for any private jet.

You can order the 3M Di-Noc Walnut FW-1022 Architectural Film here. https://www.rmwrapsstore.com/products/3m-di-noc-walnut-fw-1022-architectural-film?_pos=1&_sid=b28a9d2fc&_ss=r

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

This video demonstrates a precise technique for applying textured film, emphasizing proper overlapping for a good finish. Learn how to achieve professional results for your next home improvement project with this easy-to-follow guide. For more intricate details, download the "Dry Apply Installation Guide" from rmwraps.com to master this do it yourself application.

Surface Preparation: After the first piece of vinyl is installed, use painter's tape to mark a half-inch overlap [00:47]. Sand the textured surface of the base vinyl with 180 or 220 grit sandpaper to ensure it is smooth [00:54].

Cleaning: Use a lint-free rag with glass cleaner or rubbing alcohol to remove any debris from the sanded area [01:10].

Adhesion Promotion: Apply Primer 94 with a cotton swab to the area where the overlap will occur and let it dry for a few minutes [01:21].

Alignment Strategy: Use small tape "tags" as visual guides for the half-inch mark, which is especially helpful when working at heights or on large walls [01:43].

Squeegee and Heat: Use a specialized architectural film squeegee to press the film down [02:42]. Follow up with post-heating using a heat gun to activate the adhesive and soften the vinyl for a permanent bond [03:02].

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Thinking about an interior private jet wrap? Watch this first! Randy Miller, owner of RM Wraps, goes behind the scenes to explain the full process of transforming aircraft interiors with DI-NOC architectural films.

From wood grains to metals and stones, learn how we get started, select materials (including quick-ship patterns!), and achieve factory-quality finishes. Randy walks through the detailed steps including:

* Why the "wrapping" trend is ramping up for private jets.

* The essential first steps to get an accurate quote (photos/videos).

* Navigating material logistics (Japan orders vs. Quick Ship stock).

* Our precise preparation and installation techniques (sanding, primers, post-heating).

* Quality control and the importance of checking our work.

* How we handle pricing, scheduling, security, and travel (currently wrapping in Wichita, KS!).

* Working with on-site teams and high-end clients.

* Our full-service approach, including yacht wraps!

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

What does it take to prepare materials for a private jet burn test? In this video, Randy walks you through the exact, meticulous process required before a aircraft interior film can be tested for safety. To ensure the test is accurate, we have to replicate the precise installation process used for 3M™ DI-NOC™ Architectural Film on a real surface.

The Step-by-Step Prep Process: Step

1: Cleaning – Preparing and clearing the surface of any contaminants. Step

2: Sealing – Applying Zinsser Gardz and allowing it to completely dry for 2 to 3 hours. Step

3: Priming – Applying Primer 94 strictly to the edges of the 3" x 14" sample strips. Step 4: Installation – Wrapping the subject flawlessly with the DI-NOC film.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Randy demonstrates the reasons behind our decision to utilize the Gardz on all surfaces we covered with the Di-noc material. We had to remove the 3M DI-noc from the surface to address specific issues. Randy intends to illustrate the difficulty of removing the vinyl from the surface.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

See how to apply wood grain vinyl wrap to yacht cabinet doors and panels. Learn the professional techniques for a seamless finish. This update covers day 10 of the yacht interior refit. I focus on the VIP room, specifically covering the process of applying vinyl to four cabinet doors and the surrounding woodwork. This is for anyone interested in boat interior renovation or learning how to improve the finish of their own vessel.By the end of this update, you will see how cabinet door wrapping can change the look of a space without a full remodel. I demonstrate the technique used to get a clean finish around the edges and behind the cabinets, which is essential for any DIY yacht project. If you are planning a similar upgrade, these methods will help you achieve a professional result.Subscribe for weekly boat renovation breakdowns, and comment below if you want to see the next section of the yacht I am working on!

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Achieve seamless wood grain matching on your custom cabinetry projects. Learn how to align patterns perfectly every time.

Professional woodworking often comes down to the details that go unnoticed by the average eye. This project highlights the intensive process of continuous grain alignment, where every piece of lumber must flow naturally from the cabinet doors down to the trim and the complex cubbyhole area. You will see the specific steps required to ensure that the grain pattern remains unbroken across multiple surfaces, creating a cohesive look that signals high-end craftsmanship.

Completing this level of precision takes patience, and this specific unit required a full day of meticulous planning to execute correctly. If you are tired of disjointed patterns on your furniture builds, this focus on grain continuity will provide the roadmap for your future assemblies. Understanding how to manage these intersections is the key to elevating your custom woodworking from standard to professional grade.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Precision aircraft cabinetry assembly requires exact tolerances for every moving part and compartment fit. Examine the professional standards needed to build high-end wood interiors that survive rigorous quality inspections.

This footage captures the tactile process of fitting custom furniture components, specifically focusing on the mechanical alignment of drawers and concealed latches. If you are a cabinetmaker or interior specialist, watching these assembly steps provides a practical reference for achieving seamless, flush-mount results. We highlight the critical inspection phase where hardware function is verified against the strict requirements of luxury aviation builds.

Observe how internal sliding mechanisms interact with the cabinetry frame to ensure smooth operation under pressure. By studying these assembly techniques, you gain a better understanding of the craftsmanship necessary for high-tolerance woodworking projects where fitment is the primary measure of success.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.