Video Library of RM Elite Projects

See how to apply 3M Di-Noc to a private jet door for a durable, clean interior finish. This technique ensures a smooth, factory-grade result on aviation hardware.

Working with architectural film in an aviation environment requires consistent heat control and steady hands. We demonstrate the full workflow for measuring and trimming material to fit complex door geometries, ensuring the adhesive bonds perfectly without air pockets. This process is essential for maintaining the integrity of the cabin interior.

Proper surface preparation is the foundation of any high-quality aviation wrap. By following these methodical steps, you can achieve a result that stands up to the wear of frequent cabin travel. We break down the specific tools and techniques needed to handle high-grade vinyl application for professional results

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Watch the precise application of an aircraft interior wrap on a private jet entryway. See how we handle complex paneling.

This project focuses on the right side of the entryway, where exact alignment of material is critical. Working on private jet maintenance requires a steady hand and knowledge of how to handle delicate hardware, specifically around door mechanisms and interior panels.

We demonstrate the workflow for applying architectural film to ensure a smooth, durable finish that stands up to cabin wear. By following these methodical steps, you can achieve a factory-grade result that maintains the high standards required for aviation interior work.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn how to apply a door wrap using architectural film to refresh your interior trim and frame without painting.

This guide demonstrates the step-by-step process of applying durable material to both your door and surrounding trim molding. We cover the essential techniques for measuring the film, smoothing corners, and applying heat to ensure a professional, long-lasting finish.

Whether you are updating a single room or renovating an entire home, mastering vinyl installation is a practical way to achieve a high-end look. We focus on the precise cutting and squeegee methods required to work with architectural film, helping you avoid common mistakes like bubbles or lifted edges on complex surfaces.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn the correct method for applying architectural film to van interior walls. This guide covers the step-by-step process.

Renovating a van interior requires specific techniques to ensure the material adheres properly to the surfaces. We demonstrate how to work methodically from top to bottom, using your hands to secure the film without creating bubbles or creases. This approach is essential for anyone looking to achieve a professional-grade look inside a cramped workspace.

Proper vinyl installation relies on patience and consistent pressure. By watching this method, you can see how to handle the material effectively to ensure it stays in place on vertical surfaces. This walkthrough provides the necessary details to manage the application process confidently, whether you are working on a vehicle conversion or other renovation projects using peel and stick materials.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn how to apply a professional door wrap to your home using architectural film for a durable, clean finish.

This guide covers the step-by-step process of updating doors and trim using high-quality vinyl. We demonstrate the proper way to use a squeegee and heat gun to activate the adhesive, ensuring the material bonds securely to the surface. This technique is ideal for those looking to refresh their space with a professional-grade look without the cost of a full replacement.

Proper surface preparation is the foundation of a successful vinyl installation. We use ZINSSER Gardz to seal the surface before applying the film, which prevents peeling and ensures longevity. By mastering the heat control and tension required for trim wrapping, you can achieve a seamless result that stands up to daily wear and tear.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

See the step-by-step process for a boat table wrap, combining dark architectural film with a smooth epoxy resin finish.

This project demonstrates the removal of old material from a boat table and the application of a durable dark vinyl wrap. Achieving a professional look requires attention to detail, specifically when ensuring the surface is clean and the material is laid down without air pockets.

Once the film is secure, the final step involves applying a clear epoxy resin coat for added protection and a glossy appearance. This technique provides a resilient surface suitable for marine environments, ensuring your furniture stands up to daily wear while maintaining a clean aesthetic. Using the right vinyl wrap installation tools is essential for managing edges and corners effectively.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

See how to update your home with a professional kitchen cabinet wrap. This process demonstrates how to modernize existing fixtures.

Renovation projects often require finding efficient ways to update outdated surfaces. This demonstration focuses on the practical application of architectural film to cabinetry, countertops, and wall surfaces. Whether you are a DIY enthusiast or a professional installer, seeing the specific techniques used for material alignment and edge finishing provides a clear roadmap for achieving a factory-grade result.

The installation relies on using high-quality 3M Di-Noc materials, which offer durability and a wide range of aesthetic options for any kitchen renovation. By watching the methodical approach to material application, you can learn how to avoid common pitfalls like trapped air or improper adhesion. This guide highlights the precision required to make older fixtures look entirely new without the cost of a full demolition.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

This video is about the Architectural films. How Randy wraps a vent. Randy talks about some of the subjects you can wrap on the vinyl material and the Architectural Film Squeegees. All the Architectural Films comes 4 feet wide. You should insist on Architectural Finishes because it is lightweight and self-adhering, and can be applied on site to the existing substrate, reducing labor and material cost compared to natural materials. With  Architectural film products, you create a whole new look, quickly and inexpensively, but not at the expense of aesthetics, thanks to its uncanny resemblance to natural materials. Use this product for both renovations or new construction.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn how to wrap drawer fronts without removing the entire unit. This simple method keeps your furniture intact while updating it.

Updating your home decor does not require taking everything apart. This guide shows you the exact steps for applying vinyl wrap directly to your existing cabinets. By leaving the drawer box inside the frame, you save significant time and effort during the renovation process. Whether you are a beginner or experienced with DIY projects, this technique ensures a clean, professional finish on every surface.

To achieve the best results, focus on precision when you measure and cut the wrapping material. Removing the drawer handles first is essential for a smooth application. Use your thumb to firmly press the material around the edges, as this tactile feedback helps you avoid air bubbles and ensure the adhesive bonds correctly. Following these steps allows you to refresh your furniture with minimal tools and stress.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Applying Di-noc is the fastest way to get a clean, white finish on your outdated kitchen cabinets today.

Updating your kitchen doesn't require a full renovation or expensive new hardware. This demonstration focuses on the technical side of cabinet refinishing, showing exactly how to size your adhesive material and apply it without trapping air bubbles. If you have been struggling to get a crisp edge on your furniture, this method offers a reliable way to achieve a professional-looking result using only basic tools.

Watch how to trim the film for a perfect fit and use consistent pressure to smooth out the surface for a durable bond. By focusing on steady application techniques, you can ensure your Di-noc stays flat and secure over time. This approach works for anyone looking to refresh their space with a clean, modern aesthetic without the mess or cost of painting.

Subscribe for weekly home improvement breakdowns, and comment below if you want to see more DIY furniture projects.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

In this video, the presenter demonstrates a step-by-step guide on how to wrap a door with vinyl for a professional and clean finish. The tutorial covers preparation, measuring, cutting, applying primer, wrapping techniques, and finishing touches to ensure a flawless result.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

In this video, Randy Miller from RM Elite demonstrates the process of wrapping the inside of a lift-top desk using architectural vinyl film. He shares expert tips and techniques, including surface preparation, precise cutting, and application tricks to achieve a seamless and professional finish.

Learn the precise steps for a lift-top desk wrap. See how to measure, clean, and trim vinyl film for a professional finish.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Wrapping the interior of furniture requires specific preparation to ensure the material adheres correctly. This tutorial breaks down the cleaning process for the desk surface and explains how to take accurate measurements. You will learn the importance of leaving an inch bleed on all sides to account for overlapping and adjustments during the application.

Randy Miller from RM Wraps demonstrates the correct knife blade technique for cutting film with light pressure. This method prevents damage to the underlying furniture while ensuring clean, sharp edges. By following these desk wrapping tips, you can update your workspace furniture with confidence and precision.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn the professional techniques for a clean plane door wrap. See how to prep surfaces and cut vinyl for a smooth finish.

This guide demonstrates the full process of preparing aircraft interior components for a fresh look. Whether you are working on a restoration or routine maintenance, you will see how to handle minor surface imperfections properly. The video focuses on the essential steps for Bondo repair, ensuring the surface is level and ready for material application before the final finish is applied.

Mastering the right vinyl installation method is critical for achieving a seamless fit around complex openings and door handles. We walk through the scraping and sanding process, followed by the precise cutting techniques needed to secure the wrap without damaging the underlying structure. These methods are designed for anyone looking to improve the aesthetics of aircraft panels while maintaining durability.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Master the vinyl wrap process on complex shapes. Learn how to get a smooth, professional finish on any curved surface.

Applying this type of vinyl wrap to flat panels is straightforward, but tackling a curved surface requires a specific approach. This guide demonstrates the essential steps for managing corners and complex angles without creating wrinkles or bubbles. You will see exactly how to manipulate the material to maintain tension while ensuring it adheres perfectly to the substrate.

Success depends on your tool management. The video focuses on proper heat gun control to soften the material, allowing it to stretch and conform to difficult contours. You will also learn the correct squeegee technique to push out air pockets and set the edges for a lasting bond. By following these precise cutting and shaping methods, you can achieve a professional finish that looks clean and intentional.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn how to apply a brown furniture vinyl wrap for a clean, professional finish on your next project.

This video demonstrates the full process of giving an old piece of furniture a fresh look using adhesive vinyl. Whether you are a beginner or looking to refine your technique, you will see exactly how to measure, cut, and smooth the material to avoid air bubbles.

We focus on the practical steps of applying vinyl wrap to flat surfaces, ensuring the edges are sealed properly. By following this DIY furniture makeover approach, you can achieve a durable and aesthetically pleasing result with your furniture vinyl wrap without needing expensive equipment. Mastering this furniture wrapping tutorial takes patience, but the final result is worth the effort.

3M Di-Noc Cherry Wood WG-1364 Architectural Film https://www.rmwrapsstore.com/products/3m-di-noc-cherry-wg-1364-architectural-film?_pos=1&_sid=0e65e3e49&_ss=r

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Learn the professional method for airplane door repair using aviation Bondo. See how to prep and smooth surface damage.

This video demonstrates the step-by-step process of fixing minor damage on aircraft components. Aviation technicians and DIY enthusiasts will see how to properly prepare a surface before applying filler. Using a 5-in-1 scraper, I clear away debris and create a clean area for the repair compound to adhere correctly.

After applying the aviation Bondo, the focus shifts to achieving a seamless finish. I explain the sanding techniques required to level the compound, ensuring the door surface is smooth and ready for the next stage of maintenance. Mastering these repair techniques helps maintain the structural integrity and appearance of the equipment.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

This video shows Randy working on a wooden interior cabinet wall, aircraft component, within a hangar. The process involves pre cleaning, using gardz on the surface and then wrapping the unit using the 3M Di-noc matte sheen wood grain pattern material.

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Welcome to RM Elite! Randy Miller here, showcasing the precise application of a wood grain vinyl wrap on aircraft interior components. This video highlights the meticulous process of using a faux finish to create a beautiful wood texture, demonstrating how to wrap complex surfaces with expert care. Our techniques ensure a seamless interior design transformation, perfect for any aviation project.

Order this Di-Noc Pattern here. 3M Di-Noc Walnut FW-1022 Architectural Film https://www.rmwrapsstore.com/products/3m-di-noc-walnut-fw-1022-architectural-film?_pos=1&_sid=2289caef4&_ss=r

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.

Welcome to RM Elite! Randy Miller here, showcasing the meticulous process of applying a wood-grain vinyl wrap on an aircraft's interior components. This video highlights the precise use of a faux finish to create a beautiful wood texture, demonstrating how to install a vinyl film with expert care for a refined interior design. Our techniques ensure a seamless interior wrap, perfect for any private jet.

You can order the 3M Di-Noc Walnut FW-1022 Architectural Film here. https://www.rmwrapsstore.com/products/3m-di-noc-walnut-fw-1022-architectural-film?_pos=1&_sid=b28a9d2fc&_ss=r

RM Elite Aero Yachts

Randy Miller 

Randy@rmwraps.com - 208-696-1180.